No dirt, no noise, no bus line – the classic electrical installation is sufficient: the new JUNG KNX RF push-buttons are installed in combination with the JUNG system inserts. An easy and efficient way to quickly install a professional smart home system – ideal for retrofitting or renovations. JUNG KNX RF push-buttons connect the classic electrical installation with KNX: A KNX RF push-button is simply mounted onto a JUNG system insert. This replaces the existing mechanical switch and thus becomes an actuator. The push-button sends and receives the information wire-less, without additional cables and securely encrypted with Data Secure.
For more information, see here
Efficient blind controls, smart sun position tracking and convenient glare protection – the KNX Meteodata weather station from Theben incorporates a combination sensor, weather station and integrated GPS receiver, making it a true weather expert. Azimuth and elevation are calculated automatically. Temperature, rain, wind and brightness are precisely detected. Thanks to the three brightness sensors, the weather station is suitable for sun protection control of up to eight facades.
Find out all about the benefits and functions in the free white paper: www.theben.de/meteodata-en/
In deze lijst vindt u nieuwe KNX-producten die op de markt beschikbaar zijn.
ABB now has a comprehensive range of DALI Gateways among its ABB i-bus® KNX lighting control products. Of particular note are the DALI Gateways Premium DG/S 18.104.22.168 and DG/S 22.214.171.124. The DALI Gateways Premium now include special functions such as tunable white, human centric lighting (HCL) or dim2warm. Basic and Premium versions comply to the new DALI2 standard which increases the compatibility between all DALI devices. All DALI devices received improved commissioning with the ABB i-bus® tool extension.
The Aidoo KNX controller integrates the inverter/VRF system into KNX with the simplest communication gateway while maintaining all inverter/VRF features. With its direct connection, 2-way communication, flexible unit control and customisable KNX scenes, the ETS configurable Aidoo KNX Controller provides easy and fully interoperable integration. As a Plug&Play product, there is no need for adaptors or an external power supply. It is connected to the inverter/VRF unit in a matter of minutes. With Aidoo KNX, you can also control your inverter/VRF AC unit through as many communication options as required to implement in your KNX system with ultimate flexibility.
The new Terminal app version 126.96.36.199 is now available to download in the KNX app store. The Terminal configurator is an online planning tool with which you can easily pre-plan your KNX project. With the update, you can now easily export all group addresses to ETS with one mouse click. All functions of the group addresses are imported into ETS via an online project code. The new version is also compatible with ETS6. Changes to function names and additions in Terminal can be transferred to ETS by means of a further synchronisation. In addition, you can download your preliminary design as an XML export and also insert it offline at the construction site.
xxter makes life easier. The xxter controller is the central module in a building, enabling you to automate and operate all (KNX) functions with their free app. xxter offers many extra functionalities such as the presence simulation, scene module, planner and extensive scripts and triggers. The visualisation in the app is entirely adjustable. xxter offers you maximum ease of use with a high-standard professional quality. The controller supports KNX IP-secure. The built-in group monitor will allow you, as installer, to easily record all group telegrams for analysis in your own time, in case of a KNX installation issue. You don’t need to be continually connected to ETS or be on-site to find the issue.
The new BACnet (B-ASC profile) certified SpaceLogic KNX BMS IP Gateway, allows the control of up to 4000 BACnet points to digitise the automation of your KNX installation into Schneider Electric’s EcoStruxure™ for Building and any other building management systems. Additionally, it offers a built-in KNX choke (320mA) to power up to 32 KNX devices and can be used as a KNX IP router or IP interface. Simple and fast commissioning, thanks to the modern web-based embedded tool.
The OS-360i-KNX motion detector is designed with a 360 degree viewing angle and a 32m diameter detection range. It provides all-round surveillance without blind spots and is suitable for both lighting and HVAC automation control applications. Furthermore, its IP55 rating for environmental protection works with both external and internal humidity and it can be mounted either on the wall or on the ceiling. Moreover, all the control parameters for the detector can be programmed by the IR-11KNX Infrared remote control to make installation easier and quicker.
VIIP10 is a new touch screen with integrated web server and native connection to KNX, in addition to having support for SIP communication that allows the screen to act as a video intercom offering call forwarding to mobiles when connected to a network with a third-party SIP outdoor unit. The touch screen has a 10.1² TFT, and it is possible to visualise KNX projects by plans or by rooms (fully configurable by the user). The web server is built in for remote control from iOS/Android apps. It also provides features like yearly timings, technical alarms and push notifications as well as Python programming support for advanced user scripting.
CUBIK-TLR is a vertical touch button with built-in thermostat. It includes a capacitive touch panel with 8 customisable buttons and additional thermostat controls for setpoint through a circular slider with LED indicators, function mode and fan speed. It is also possible to switch the thermostat on/off with a dedicated button. Thanks to the built-in humidity sensor, it is also possible to define dew point measurement according to relative humidity and temperature. Like the rest of the CUBIK push button and thermostat family, it is also possible to fully customise the frontal glass, having the option to define icons, labels, logos, etc. via the online tool https://cubik.besknx.com/.
The Qubik thermostat is equipped with a level of KNX touch control technology that is truly state-of-the-art. The technological innovation is represented by the possibility of customisable programming of the device’s functions based on the needs of the end user. Keys are configured with ETS. White or black base; up to 8 capacitive keys; equipped with 2 RGB LEDs. Dimensions: 80X80 mm or 120X80 mm; LCD display; integrated temperature sensor; bus line connection via KNX terminal; button and programming LED on the back; flush-mounted on round, rectangular or square box; protection IP20.
ComfortClick has launched a new version of Jigsaw KNX servers for controlling KNX-based smart buildings. The new Jigsaw comes with hardware and software improvements. Now with more processing power and an integrated Modbus / BACnet gateway. The new ComfortClick bOS software now also supports KNX Secure, MQTT, Denon Heos, Fibaro Lite and GSM modem. All the previously supported systems are also still there: Google Assistant, Amazon Alexa, Satel and Paradox alarms, Sonos, Philips Hue, IP cameras, Global Caché, IRTrans and TCP/IP devices, etc. bOS enables the design of a custom user interface, logical operations, scenes and schedules.
The Glass Touch Sensor and Room Thermostat from the CONTROLtronic Glass Touch series Living Emotions® offers innovative technology and superior design: real glass cover in different colours and finishes, individual symbols for the 6 sensor fields, display for temperature and humidity indication, colour LED illumination RGBW for the symbols, proximity detection, temperature and air humidity sensor, extremely flush wall mounting. The support of KNX Data Secure makes it possible to set up a secure and protected KNX installation.
Automation creates well-being, comfort and reduces the risk of illness and infection by precisely adjusting the indoor climate. The detectorline KNX multisensors provide the necessary information in one device. Presence-dependent control of lighting systems - contactless and hygienic with additional measurement of ambient brightness, temperature, relative humidity and volatile organic compounds (VOC). An additional acoustic sensor provides optimal, expandable area coverage. In the modular system as 4-fold mounting - flush-mounted, surface-mounted, recessed and flush with the ceiling; simply universally applicable.
The onework Master is a virtual room controller for improving the quality of the workplace and increasing the energy efficiency of buildings, which can be fully configured via ETS as a certified KNX device. It offers the user a variety of intelligent automation functions, which essentially control lights, blinds and windows with the inclusion of outdoor and room sensors. The user can manually override the automation at any time. The intelligent automation functions include human centric lighting (HCL), energy harvesting, glare protection and summer heat protection as well as the inspiration, concentration and presentation mode.
The new KNX Room Master Controller has been designed to be installed in different building systems: residential, offices or hotel rooms. It covers most of the control requirements for this type of installation and offers several functions which are freely configurable: switching of up to 4 lights or electrical loads, control of up to 2 blind/roller shutter drives, control of 1 fan coil with 2 pipes, dimming of up to 4 x 8A LED strips. Incorporates up to 12 Inputs, 8 of them are long distance binary inputs (up to 200m) and 4 are binary or analogue (temperature probe) inputs. Also includes LED status display for each channel along with manual operation even without bus connection.
The Mona product family consists of glass touch panels with unlimited configuration options. DND-MUR panels (with IP65, horizontal or vertical placement options), thermostats, switches, card holders and sockets (EU, BS, modular) can be used as single units as well as combined monoblock panels in modules of 2-gang, 3-gang, 4-gang or more. Thermostats have 0 to 8 buttons, switches have 1 to 12 buttons, card holders have 0 to 6 button options. All of the buttons and thermostat LCDs are RGB and have long-short-double press functions. Products can be customised in the desired colours. The web configurator from Mona allows system integrators to configure the product easily online.
The IPSBA01KNX integrates, in a compact size of 4 DIN modules, a KNX power supply with aux. output at 30V DC with a total current of 640mA and an IP interface allowing KNX installations to be implemented quickly and efficiently. It can be linked to a Cloud platform, through MQTT protocol, and can thus share relevant data from connected devices. The KNX IP interface enables the connection of a KNX network to an IP backbone. The device uses KNX Data Secure protocol and is configurable with ETS. Logic blocks are available for simple or complex expressions with conditional operators. It integrates the “Virtual Holder Logic” for hotel applications deducing the presence of people in the room using dedicated sensors.
The device BO24F01KNX is a DIN rail EIB / KNX actuator with 24x16A - 230V AC relay outputs. You can take advantage of the abilities of the BO24F01KNX module and configure via ETS a mix of applications: lighting, loads, blinds, shutters, fan coils, thermostatic valves, motorised valves. The outputs can be configured as: 24 outputs for light / load control, 24 channels for valve in PWM, 12 channels for roller shutter / venetian control, 12 channels for 3-point valve control, 6 x 2-pipe fan coil actuators, 4 x 4-pipe fan coil actuators. It is also possible to combine 3, 4 or 5 relays for up to 4-pipe / 3-speed fan coil control or combine groups of relays for special functions using logic interlock.
The Virtual Switch is a KNX S-Mode device with a user interface organised in expandable graphical pages for on/off control of consumers, dimming of luminaires, control of motorised drives or other programmable control functions. The integrated temperature sensor also enables it to be used as a controller, allowing manual selection of the temperature and operating mode for the climate zone in which it is installed. The elegant interface is housed in a 2.63” borderless colour display, perfectly integrated with the Ekinex finish.
Multiprotocol, Logic and Visu Server for 12 protocols with RS-485, RS-232, 1-Wire, 4 x Input, KNX, Gigabit and USB. KNX up to 8,000 objects, KNXnet/IP interface (25 tunnels), KNX logging and bus monitor up to 1 billion telegrams, time sync KNX/NTP, multi-world coupling for any number of locations. VPN and reverse proxy for remote access. Logic engine with simulation and persistence (extreme flash with 100 trillion cycles). Visualisation with CometVisu and Grafana. Includes gateway to Modbus RTU, Modbus TCP, MQTT, HTTP/REST API, 1-Wire, IFTTT, Philips HUE, ekey home & multi. Time series for each data point with graphical analysis. Arbitrary extension with APPs and Docker Container.
The KNX gateway for solar panel inverters provides a simple solution to transfer all relevant data from inverters to KNX. It is compatible with inverters from the brands SMA, SolarEdge, Fronius and Huawei. It allows integrators to take benefit from a fully integrated solar panel inverter for energy management. Data can be used to optimise energy consumption, monitoring, trending or to trigger specific actions in the KNX installation. The device is DIN-rail mounted and connects to the inverter over the local Ethernet network.
ELEK has started its successful line of 640 mA KNX bus power supplies. The ELKPS640 was newly developed under the most modern technical viewpoint and impresses with its optimised internal structure. Aspects such as quality and reliability were considered first with an additional unchoked voltage, a bus reset button and LED display of operating states.
With brightness, wind speed, precipitation and temperature, Windancer KNX-GPS provides the most important weather data for the KNX system. Additionally, the weather station controls the shading on up to eight façades according to the current position of the sun, which is calculated from GPS data. The building is shaded in an energy-efficient manner and at the same time the technology is protected from wind, rain and frost. In addition, there are timer functions and logic modules in the KNX application. Windancer KNX is also available without GPS module, i.e. time and sun position functions.
KNX eTR 102 FC is a room controller for fan coil air conditioning systems from the eTR series by Elsner Elektronik. The heating/cooling unit and fan coil are controlled separately as required. The automatic room temperature control is preset in the KNX application. Not only the fan coil system, but also another heating and cooling stage can be controlled, for example an electric or water-operated floor or wall heating system. For manual control, KNX eTR 102 has touch surfaces with symbols and LEDs for three-stage switching of the fan, automatic and on/off.
EmCom KNX Presence Detectors bring energy saving and automatic lighting control to KNX Building and Home Control System with ease and comfort. Wide Range Presence Detector covers a 360° detection range up to diameter 24 meters; High Bay Presence Detector well meets the requirement of 15 meter installation height; and Corridor Presence Detector takes care of a 40×5 meter aisle detection range. The whole product lineup is available for intelligent lighting management, offering superior energy efficiency and living comfort.
The ENA² offers remote access without “Cloud”. The device is configured only with your Web browser. The optional “Relay server” forwards your VPN connections to be independent of the internet connection type (IPv4, IPv6, DS-Lite) and router configuration without lowering security. VPN data still can only be decrypted by the user. The ENA² can manage a “Protected Network” to prevent “Cloud” IoT devices from accessing the building automation. All KNX telegrams are stored into an integrated database. The device website visualises telegram data in time-value-charts and offers error analysis.
The new KNX presence and movement detector Type 18.5K PRO allows the detection of occupancy using an optimised Fresnel lens and a powerful pyroelectric sensor, detecting a maximum area of 64 square meters. The brand-new software is intended to control lights with up to 5 different outputs so you can manage different groups of lamps, even in different ways. It is possible to perform fine-tuned dynamic light regulation (even movement-independent), dynamic switching, simple detection and master-slave structures. There are also logic functions that allow you to perform specific configurations without using external devices such as logic gates, delays and conversions.
Thermo ICE KNX is the thermostat for the management of heating/cooling systems in 2- or 4-way systems, using two-point, proportional-integral and fan coil control algorithms. Thermo ICE KNX in technopolymer has integrated proximity, temperature and humidity sensors (allowing you to directly manage a humidification/dehumidification system), an external temperature NTC sensor input (such as floor heating protection) and supports the KNX Secure implementation. The glass variant can be combined with an external humidity sensor, has an integrated temperature and proximity sensor and two inputs for potential-free contacts.
The new highlight in intelligent building control is the wireless Gira KNX RF technology. Many smart home functions can be automated in an existing 230 V installation in combination with the Gira System 3000 and the new KNX RF operating top units – all tamper-proof, of course, thanks to KNX Secure. If the Gira X1 is also integrated, operation can be carried out via smartphone. It also lets users make their own adjustments to the functions. By integrating the Gira S1, all the functions are also available remotely. With the Gira KNX range, existing buildings can now be easily connected or upgraded with KNX – which means it is no longer a system exclusively for new buildings.
The TANTRON 4’’ Touch Panel integrates scenes, switches, dimming, RGB and curtains. It can support up to 10 air conditioners (VRV/FANCOIL), HVAC, air quality, music, fresh air function, timing, logic and page jump. It not only has a built-in temperature and humidity sensor, but also supports an external temperature and humidity sensor. Based on more than 20 years of project experience, for better application in actual scenes and to extend the life of the screen, they have innovatively built-in laser distance detection so that you can implement energy-saving screensavers and other functions. The 480*480 resolution screen supports brightness adjustment.
The KNX WALTZ Touch+ Pad is the latest cutting-edge smart KNX pad presented by GVS. The smart pad supports not only full touch panel functions from its 3” screen but also in its THREE pairs of mechanical push buttons. Typical KNX functions like switching, dimming, curtain/blind control, scene control, room temperature adjustment, HVAC control, audio control, RGB and RGBW dimming, etc., are all supported by the device. The button cases can be either metal or plastic, with options for laser printing or curved icons. In addition, the pad is also equipped with built-in temperature and humidity sensors with two external input interfaces.
The multifunctional actuator, 3-fold, 6A, flush-mounted is a module that integrates multiple relay output functions, including switch output, curtain output, fan output or valve output, in addition to dry contact input and LED output indication functions. The corresponding output function can be configured according to actual application requirements. This module is compact and small in design, flush-mounted, and can be installed in a conventional 80 mm or 86 mm wiring box. The output uses screw terminals to implement the electrical connection and the bus connection is directly connected via the KNX terminal. The additional power supply is not required except for KNX bus.
Multifunctional Actuator, 3-Fold, 6A, Flush-Mounted. The KNX Tile Display is a multifunctional control panel for home automation. With a 3.5-inch LCD screen and full screen touch control, it is convenient for the users to control lights, curtains, scenes, AC/FCU, underfloor heating, music and fresh air in an intuitive way.
ntesis is launching new LG VRF interfaces that enable full control and monitoring of up to 16 or 64 Indoor units from any KNX device or system. Also compatible with all LG controllers, they keep the KNX system permanently updated with the latest parameters. Developed in collaboration with the AC manufacturer, LG VRF to KNX MIU are compatible with air conditioning, ventilation and air to water systems. With direct access to the outdoor unit signals, they provide energy efficiency and effective preventive maintenance. These interfaces are configured with MAPS, the powerful tool for easy commissioning with VRF scan function and diagnostics capabilities.
he device is a modular installation device (MDRC) which is used in home and building automation systems. It is intended for installation in a standard electrical box. Physical address assignment and parametrisation are carried out with ETS. The device is powered by the I-LUXUS KNX bus and requires no additional auxiliary voltage supply. Flush-mounted actuator with superior capability, despite its small dimensions. 2 relay outputs, an analogue input (PT1000) and 2 digital inputs. The device is especially suited to retrofit projects. (LXA-102-16A). Relay: 16A 102A inrush current 230VAC @50-60 Hz. Size: 42 x 42 x 22 mm (LxWxH) 34 g.
The new VERSO/INDOOR is the latest addition to the Iddero Verso family of 4.3” KNX capacitive touch panels. This model retains the elegant design, attractive visualisation and advanced functionality from the Iddero Verso series (including remote control from smartphones and tablets through the Iddero mobile app), supports 96 controls organised in 12 pages and also doubles as an indoor monitor for SIP-based door intercom systems. VERSO/INDOOR is fully compatible with SIP door stations from main door intercom manufacturers right out of the box and provides exceptional image quality and full-duplex audio with acoustic echo cancellation. A perfect solution for your next KNX project.
The iHaus platform integrates building systems technologies such as KNX, DALI, Zigbee and ModBus IP. The iHaus Pro server is the enterprise solution for building automation in residential and commercial properties. It serves as a firmly installed 24/7 basis for the iHaus platform. A certified KNX IP gateway or a KNX IP router establishes the connection to the KNX. The associated iHaus app serves as the user interface and will be customisable for residential, office as well as retail spaces. Building data allows operating procedures to be optimised and enables new digital services.
The X1 server is a compact device to implement visualisation and control systems for KNX standard systems, for mobile devices (iOS and Android) and Mac/PC. Through a dedicated configuration software, it is possible to manage the control of lights, climate, blinds, shutters and energy of a modern KNX standard building which can be integrated with multimedia systems, video surveillance, intrusion detection and much more. The visualisation environment, accessible with the dedicated app, can be fully customised according to your taste, both in the graphics and in the layout of the intelligent system control interface. It is also possible to control via voice commands given to the Amazon and Google assistants.
The DaliControl e64 Pro expands the family of KNX-DALI gateways designed by IPAS: it supports KNX Secure and, as the first fully DALI-2-capable gateway, allows the integration of motion detectors, light sensors and other DALI-2 input devices in addition to lighting control. The additional Ethernet connection offers direct and secure communication with the gateway. When commissioning the DaliControl e64 Pro, you have the choice of using the integrated web server, the control panel with display or the ETS app. From the simple execution of switching and dimming functions to complex colour light controls and human centric lighting (HCL), the DaliControl e64 Pro offers a complete range of functionality.
The KNX Home Server is a controller, a cloud and visualisation app for the fast creation of a smart system for managing apartments, offices and houses based on KNX. It includes the essential functions of KNX smart home: connection to the bus via TP1 and setting devices from ETS, integration of SIP intercoms, IP cameras, Samsung TV sets, Sonos and Bluesound, schedules, routines, timers, notifications, secure remote and voice control and fast interface creation. The control project can be created right in the mobile app in just an hour! And you do not have to visit the site – a configuration can be downloaded to the server from the cloud using a mobile app on iOS, Android or Windows PC.
With update V6.1, the SMART CONNECT KNX Remote Access, the secure gateway for remote maintenance, remote access and remote diagnostics, gets an extensive VPN feature. The Remote Access serves as a VPN server. This allows you to work in the remote network without needing to make complicated router settings. Also, you can maintain not only KNX systems remotely, but any other systems. This offers new possibilities for remote maintenance and remote access via VPN. Additionally the SMART CONNECT KNX Remote Access version 6.1 and higher also supports KNX Secure. You can update the gateway free of charge using the integrated function on the device web page.
The smart panel has 4 buttons with 8 functions i.e. it supports switch/scene/lighting value/curtain control through press/hold operation on the button. It provides 2 I/O input ports suitable for connection with the sensor, the contact module, the reset switch, etc.
Fitting 55mm systems/ranges, the MDT KNX Blind Push Button Smart shows all the information about the shading to the user. On the active colour display, the function and status indication (altitude, slat and wind/rain/frost alarm) of the blinds can be shown. A highlight of the push button is the integrated time switch with eight switching times and power reserve. It offers daily/weekly/astro switching functions without requiring additional KNX components. Height and slat can be controlled via a timer. With the automatic holiday calculation, shifted switching times can be programmed very easily.
The PWM-200KN series is a constant voltage driver with PWM style output, which is able to maintain the colour temperature and the brightness homogeneity when driving all types of LED strips. With the built-in KNX interface with Data Secure function, it avoids using the complicated KNX-DALI gateway. It operates from 100~305VAC and offers 4 output voltage models: 12V, 24V, 36V and 48V. Thanks to the high efficiency of up to 94%, with the fanless design, the entire series can operate at -40°C~85°C case temperature under free air convection. The minimal dimming level down to 0.01% is suitable for low light level applications, e.g. cinema.
PWM-200KN series is a constant voltage driver with PWM style output, which is able to maintain the color temperature and the brightness homogeneity when driving all kinds of LED strips. It is a built-in KNX interface with Data Secure function to avoid using the complicated KNX-DALI gateway.
PWM-200KN operates from 100~305VAC and offers 4 output voltage models: 12V, 24V, 36V, and 48V. Thanks to the high efficiency of up to 94%, with the fanless design, the entire series is able to operate for-40°C~85°C case temperature under free air convection. The minimal dimming level low to 0.01% is suitable for low light level applications, e.g., cinema. The output frequency is changeable up to 4K Hz compliant IEEE 1789-2015 no risk requirement providing a great solution for health concerns due to light flickering. For more details, please click here.
This extension for the NETx BMS platform provides a sophisticated, modern solution for hospitality projects with the support of KNX devices. Hotel guests can access the hotel’s GRMS control system by simply scanning a QR code at check-in. Guests can control all room functions on their smartphone such as lighting, air conditioning, shutters/blinds, DND/MUR. The user interface is fully customisable so that each hotel can provide its own corporate identity within the app.The QR code for access to the rooms is automatically renewed each time the guest checks in. The secure web-based visualisation includes e.g. SSL/TLS for iPhone and Android Mobile.
With its high-resolution 8'' display and the included YOUVI visualization, the PEAKnx Controlmicro is ideal for room control of a KNX building. The KNX room controller can be used as a client or as a stand-alone KNX server. A direct KNX connection and the included IP router software make it possible. The Controlmicro is equipped with Windows 10 LTSC and allows you to use all Windows and web-based visualizations. It can be mounted flexibly in portrait or landscape format and is available in two design variants. Among other things, the panel impressed the jury of the Red Dot Award: Product Design 2021 with its high-quality fabrication and ambient lighting.
More details about this product can be found at this page.
The new version of the KNX software YOUVI integrates all SIP door stations with video transmission directly into the visualisation. Thus, the PEAKnx panels can be used as an intercom station with door opener function. In addition, multiroom control with Sonos and trivum sound systems are possible via the KNX touch panels with the update. The YOUVI software package covers all common smart home functions and more – from voice control to the integration of IP cameras and logics.
The passive emergency call in the car is almost a matter of course. However, most accidents happen in the home. The newly launched voice assistant “ARAGON Companion” supports the anomaly detection with the help of ML and enables both the “active” and the “passive call for help”. The learning process for daily actions takes place on the device. KNX motion detectors, actuators and door contacts are transmitting events to ARAGON. In case of abnormalities (e.g. long stay in the bathroom), the resident is asked whether help should be called. ARAGON can easily be retrofitted in all types of KNX installations.
Thinknx introduces CompactDIN, the 9-module DIN rail mounting server that offers an advanced management of the KNX automation plant. Designed to achieve high performance, it does not have any limitations on the configurable systems. In an elegant case made of aluminum, it is equipped with an extended set of I/O, two serial ports and a 1.54” screen that enables the monitoring of the IP address and control of the inputs/outputs, as well as the monitoring of the server status and network setup. The USB ports allow the communication with the local storage for data collecting and logs. It supports connections with anti-theft and multimedia systems; everything can be integrated following the chosen logic.
The new Merten KNX Push Button offers maximum flexibility while providing high efficiency for installers. Flexible adjustment of the number of rockers with up to 16 different combinations means customisation has never been so easy - with changes possible even in the last second of a project. With eConfigure KNX, commissioning is even faster and less complicated. The display for dynamic labelling allows installers to adapt the device to the user’s needs, such as individual icons for each button and freely adaptable text. Haptic buttons, an integrated temperature sensor and a modern design perfectly in tune with Merten System D aesthetic frames, will make it a highlight of your KNX projects.
he “Wiser for KNX” IoT controller offers the full potential of the IoT world! With its integration of the KNX IoT 3rd party API, Merten offers non-KNX certified partners an easy, secure and standardised way to communicate with a traditional KNX installation. Any company or system integrator can develop a solution to interface different systems to a KNX installation such as customised mobile apps, connection to cloud services, integration into the company’s systems, … With the “Wiser for KNX” 3rd party IoT API, the possibilities are endless.
Wiser KNX Hybrid Solution is the combination of a new app “Wiser KNX” and a catalogue of wireless devices that you can connect to a KNX installation. “Wiser KNX” is the new user experience to make your home smarter, more sustainable, resilient and efficient: get your home to work harder for you while optimising your home resources, making it smart and sustainable. The new wireless product catalogue allows you to extend and enrich any KNX installation: control your wired and wireless devices from wherever you are, create scenes, get notifications, unlock the full potential of your home’s efficiency, security and safety, making your home experience more comfortable than ever.
The Schüco Building Skin Control (BSC) system platform is the solution for integrating and controlling Schüco building envelope units. Up to 30 connected Schüco aluminium windows and sliding units equipped with Schüco TipTronic or Schüco DriveTec drive technology can be intelligently networked. Schüco BSC can be connected to the building management system with a KNX gateway or integrated into a KNX-controlled smart home. User-defined specifications are configured individually: automatic window closing when it rains, time-controlled ventilation or convenient night-time cooling are easy to regulate via sensors.
The N 262 and N 263 binary inputs are the newest addition to the Siemens DIN-rail mounted device portfolio. The devices are available in the sizes 4 MU and 8 MU in potential-free or potential-loaded versions. The easy-to-install and intuitively operable devices boast a uniform appearance and a wide range of application options. They also provide all the benefits of the current generation of DIN-rail mounted devices, such as maintenance-free terminals and direct operating level In addition to switching, dimming and controlling. Access control by means of differential pulse counting is possible by using two devices to determine the number of people in indoor rooms.
The IR Quattro HD-2 KNX PIR presence detector from STEINEL is ideal for use both in offices and classrooms with predominantly sedentary activities and in high-ceilinged rooms such as sports halls, meeting or conference rooms. 5,200 switching zones provide maximum detection quality. Its square lens enables room-typical detection at a maximum mounting height of 12 m. The true presence area covers 81 sqm (9 x 9 m). With tangential detection, it has a range of 576 sqm (24 x 24 m). Its detection is digitally adjustable. As a KNX presence detector, it also detects the temperature and humidity of a room.
The smart switch solo offers residents an excellent room operation in a classic square design. It fits like a conventional KNX switch into the standard flush-mounted box but offers many more options. Light, shading, climate, entertainment or physical access control – solo can be individually configured to suit the installation in the room and allows intuitive operation. The integrated temperature sensor makes a separate room thermostat unnecessary. The frameless real glass front underlines the elegant design. This particularly comes into its own when installed flush to the wall with the optional housing – whether in a smart home, in an office, in a hotel room or a conference room.
As a manufacturer of high-end designer KNX switching gear, they have an elaborate product range with invisible switches, elegant sockets and minimalistic detectors. Tense detectors range from indoor to outdoor and from minimalistic discs to ultraminimal 18mm domes. To complete this range, they have now developed the Motivity Line, a line detector, where the small rectangular head is visible, similar to their Motivity Ceiling device. Simply drill a hole, connect the KNX cable and plug in place. The Motivity Line is a motion detector with integrated lux and temperature sensor. This gem is available in black or white, suiting any mounting surface, and is perfect for hallways, bedsides or staircases.
With the DALI-2 certified DM 4 DALI KNX gateway, up to 30 DALI operating devices per channel can be controlled via broadcast commands. Broadcast communication does not require DALI addressing or grouping and considerably simplifies commissioning and maintenance. The 4-channel gateway also supports the control of the colour and colour temperature of devices according to DALI Device Type 8 (DT8) in a KNX building automation system: For example, the working atmosphere in offices and meeting rooms can be made more pleasant with colder or warmer light. The DM 4 DALI KNX supports KNX Data Secure.
With theMura KNX, high-quality design and comprehensive functionality go hand in hand: the integrated button can be freely parameterised and enables manual switching - regardless of whether it is a motion detector (S) or a presence detector (P). Orientation light, integrated temperature measurement and acoustic function, logic channels and flexible day and night switching offer significant added value for building automation. theMura supports KNX Data Secure. Subsequent updates to the KNX firmware are possible. With optional accessories, theMura can be integrated into many common switch ranges.
The RP341v2 is a complete multiroom sound system for 4 rooms. 4 streamers, 1 DAB+/FM tuner, AUX input and 4 stereo power amplifiers with 2x30 watts each are integrated. The RP341v2 is completely integrated in KNX. It can be controlled via KNX buttons, G1/X1, visualisations (e.g. HomeServer), via the free trivum app or via any web browser. The RP341v2 can be combined with other trivum devices. This means that music from internet radio, Spotify, Deezer, Qobuz, Tidal, AirPlay, NAS or AUX can be heard in up to 64 rooms.
This simple yet striking device combines easy controls with a clear display. In addition to the ring with backlighting and customisable colours, it has four push buttons: temperature measurement unit (°C /°F), fan speed selection, ON/OFF and customisable button. The “mid season” function is designed to best exploit heating and cooling systems. Produced in two colours - grey and white – it is available for the Eikon, Arké, Plana and Idea wiring series. All versions offer a security level guaranteed by the KNX Data Secure protocol.
The thermostat combines easy controls with a clear display. In addition to the ring with backlighting with customisable colours, it has four push buttons: temperature measurement unit (°C /°F), fan speed selection, ON/OFF and customisable button. The “mid season” function is designed best to exploit heating and cooling systems. Produced in two colours - grey and white – it is available for the Eikon, Arké, Plana and Idea wiring series. All versions offer a security level guaranteed by the KNX Data Secure protocol.
The new KNX surface-mounted actuator from WAREMA offers reliable control of up to four 230 V sun shading drives and excels with simple, safe installation thanks to manual operation via Bluetooth, replaceable miniature fuses and spring terminals. Furthermore, with the new “connect & secure” series you benefit from the highest encryption standard KNX Secure and an intelligent update function via the bus line. And best of all, the Pro version enables even faster commissioning thanks to automatic runtime detection.
Weinzierl Engineering GmbH presents the KNX IP Interface 740.1 wireless as a new edition of the successful KNX Interface 740 based on WLAN. It can be used by ETS5 or ETS6 as a programming interface. On the laptop, the user simply has to establish the connection via WLAN and ETS will detect the device automatically in the connection manager. Power is supplied from the KNX bus without an external power supply. The wireless bus access allows the installer to move freely in the building. The KNX IP Interface 740.1 wireless is therefore a tool that should not be missing from the laptop bag of a professional KNX installer.
Tecla is Zennio’s newest range of polycarbonate capacitive touch switches. Tecla 55 can be combined with Zennio’s ZS55 frames and electrical accessories, but also with many other standard 55x55 frames to match any design and produce unique combinations. 1, 2, 4 and 6-button versions of the Tecla 55 are available, with each button configurable either individually or as part of a pair (e.g. for blinds or dimming control) and each individually backlit. Backlighting can be configured to respond to the proximity and luminosity sensor and adjust automatically. Tecla 55 also has an input to connect a temperature probe that can be used with the built-in thermostat or solely to send temperature readings to the KNX bus.